wincc7.0 sp1无法移植6.0的项目过来，提示：（移植已完成。移植中发生错误。祥细报表可在文件XXX中找到）。*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-16 16:51:39

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-16 16:51:56

Migration finished with errors.
*********************************************************************
*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-22 15:54:21

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-22 15:54:40

Migration finished with errors.
*********************************************************************
*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-23 10:33:37

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-23 10:33:58

Migration finished with errors.
*********************************************************************
也不能建新的项目？？？？提示：cannot open/create wincc project - project manager can't start basis application XREF

重装系统吧。

试了取消共享，还是不行。看来是要重装系统了。
还有别的办法吗，不想重装系统。